3D printing

Print the boxes yourself

  • This is the 3D printer used to produce all the boxes shown

  • The transparent fillament used in a previous version of base station encapsulation

  • The transparent fillament used in a previous version of base station encapsulation

  • View to the USB and ethernet port of the Base station

  • View to the 1-Wire port of the Base station

  • The box can easily be opened to access the Raspberry Pi

  • The built in cable relief protects the electrical connection from access strains

  • The built in cable relief protects the electrical connection from access strains

  • Front view: Bottom part of the brick enclosure box

  • Side view: Bottom part of the brick enclosure box

  • Front view: Top part of the brick enclosure box

  • Side view: Top part of the brick enclosure box

  • Front view: Optional battery holder for the brick enclosure box

  • Side view: Optional battery holder for the brick enclosure box

Do it yourself

We share the 3D printing plans for the TMOR Base station as well as the brick enclosure box. By providing you with the plans you can copy, alter and enhance our design to your own wishes. The each enclouse box is split up in different files (top, bottom and middle part).

In the download section you can download the latest stl files.
However, if you do not want to 3D print the box yourself, then you can purchase it here.

Brick

The 3D printing plans for the brick Version 2.0. Top and bottom are two separate files. The initial version is 2 for the bottom and the top. Additionally you can attach the battery holder, in case you want to power your Brick not with the USB power cable but the battery pack.

In the download section you can download the latest stl files. If you want to adapt the TMOR Base station box to your needs, you can download the 123dx files from the library section.

Release date: August 2017

Type: Brick box

Hardware: Brick Version 2

Version of bottom: 2

Version of top: 2

Base station

The 3D printing plans fit the Raspberry Pi Version 2 and 3 as well as the Asus Tinker board. Top and bottom are two separate files. The initial version for the top part is Version 5 and it is compatible with the bottom of Version 4.3.

In the download section you can download the latest stl files. If you want to adapt the TMOR Base station box to your needs, you can download the 123dx files from the library section.

Release date: November 2015

Type: Base station box

Hardware: Raspi 2/3 and Asus Tinker

Version of bottom: 4.3

Version of top: 5

Related Topics

Boxes to encapsulate and protect your Bricks and Base station

View

Boxes

Boxes